Based in Sacramento, our mission is to safely provide high quality general engineering services on time, delivering the best value to you. A family tradition of serving with instilled core values since 1948, we are motivated to share our knowledge gained over the decades. We aim to give you, our customer, an exceptional experience and outstanding results!Based in Sacramento, our mission is to safely provide high quality general engineering services on time, delivering the best value to you. A family tradition of serving with instilled core values since 1948, we are motivated to share our knowledge gained over the decades. We aim to give you, our customer, an exceptional experience and outstanding results!
Amedeo Biondi 1948-1954
Gene Biondi 1955-1985
Steve Biondi 1986-Present
Broker Of Record:
Interwest Insurance Services
PO Box 255188
Sacramento Ca 95865-5188
Artisans Insurance LTD
A Member-Owned Group Captive Program
Specific Excess Reinsurance coverage by Zurich North America
Mike McStocker, CPCU – email@example.com
Commercial General Liability & Auto Insurance:
Asphalt Surface Development Association
Regional Purchasing Group
$2Million Commercial Liability Limits / $5Million Excess Liability Umbrella
Greg Scoville – firstname.lastname@example.org
Great American Insurance Company
A.M. Best# 002213
Financial Size Category: XIII ( 1.25B- 1.5B)
Renee Ramsey, Administrator – email@example.com
What Our Customers Say...
"Got to say the work they do is so much better than I've seen other companies do and I have seen pictures from other companies compared to biondi."
"Great friendly work place"
"Biondi Paving & Engineering did our site work, they did an excellent job. On time, on budget and high quality!"
About General Engineering Contractor
If you have been spending a lot of time looking for the best General Engineering Contractors, there are a few things that you should keep in mind before you make your choice. A General Engineering Contractor is responsible for the design and construction of public works, such as dams, sewers, private roadways and others. They are also responsible for the analysis of these projects and provide the estimate of cost of the project including a timetable. A General Engineering Contractor usually contracts with private parties to perform specific jobs, which includes the design and construction of water treatment plants, tunnels and airports, bridges and harbors, public roads and highways, sewage treatment and disposal, surface transportation of waste, subsurface drainage systems and water systems, underground railroads and telecommunications.
It doesn't matter whether you need a General Engineering Contractor for a small project or a huge one, the first step that you must take is to find one. There are many ways that you can do this, the most common ones include searching the internet, asking your friends and relatives who are also contractors, taking a job in the construction industry or by applying for a job in a construction firm. The Internet is the best place to start when you are looking for a general engineering contractor since you will be able to access a large number of firms that specialize in different types of projects. The next thing that you can do is to ask your friends and relatives if they know anyone that has used the services of a general engineering contractor, or you can also search for them online.
Once you have found a company or two that you feel comfortable working with, you can then interview them to get their thoughts on how you can benefit from a service like theirs. Asking a general engineering contractor questions will give you a better idea on what kind of work that they are capable of doing, and what kind of prices they charge. After all, your first goal is to make sure that your treatment plant is efficient enough to keep up with the demands that your business is currently making. You don't want to pay for contractors who will only be able to maintain your existing level of service. Another important question that you should ask your contractor is how long they have been in business. Since a new company will be able to provide better services than an established one, you will want to choose them over the older ones.
It takes four years to complete the licensing process. The good thing about this is that it allows you to focus on quality work instead of worrying about the duration of the license. Four years is enough to train your contractors and help them get familiarized with the procedures that they need to follow in order to be licensed. The reason why you need to check the length of time that the company has been in operation is because a lot of the fraudulent companies don't actually last for this long. After four years of business, you can expect to see a major turn around when it comes to their work.
One of the things that your licensing process will consist of involves taking a test that will measure your potential as a general engineering contractor. Applicants must pass this exam in order to ensure that they are qualified to apply for the jobs. There are many different tests that can be taken in order to evaluate the suitability of applicants, so make sure that you request that your contractors take one of them. Before taking any of these exams, however, make sure that you check if your contractors have taken one of them first so that you can evaluate their performance.
In order to complete the entire licensing process, you will be required to pass a major examination. This exam will cover everything from general engineering contractor duties to water supply safety. To get your license, you need to be knowledgeable about all of the things that you will be responsible for. By finding a person who has plenty of experience doing the kinds of tasks that you are interested in, you will be able to gain everything that you need to get started.
Archeologists have found prehistoric sites in the Oakley area. One substantial shell mound was discovered early in the 20th century near what is now the east edge of town. The Northwest Information Center of the California Historical Resources Information System monitors the archeological investigations undertaken in Oakley. Around three-dozen such projects have been completed in the past 25 years, yielding only four prehistoric sites in the city. However, the information center believes there is a high possibility that other prehistoric sites remain within the city. To enable further archaeological excavation the site referred to as Simon Mound was purchased by the Archaeological Conservancy after many of the ancient settlement places had already been destroyed by urban encroachment. Simone Mound has provided bones and fragments from burial sites starting around 1000 A.D. and is near a similar Conservancy preserve, the Hotchkiss Mound.
The first accounts of identifiable cultural community in the west delta are attributed to the Bay Miwoks, who occupied the region between 1100 and 1770 AD. The Bay Miwok people, usually called the Julpunes or Pulpunes by European explorers, were organized into "tribelets"—political units that included several fairly permanent villages and a set of seasonal campsites arrayed across a well-defined territory.
Incursions of the Spanish Empire into the Oakley area began in the 1770s. The first to enter what are now the city limits was the De Anza expedition of 1775–76. However, after a failed attempt to find a route through the tule swamps to the Sierra, the De Anza expedition returned to Monterey. Subsequent expeditions by the Spanish did not result in colonization. Europeans settled in the Delta in the 19th century, but were killed by malaria and smallpox.
Oakley's first post office was established in 1898,
Oakley only became an incorporated city a full 101 years after it first post office opened, in 1999.
The 2010 United States Census reported that Oakley had a population of 35,432. The population density was 2,193.2 people per square mile (846.8/km2). The racial makeup of Oakley was 22,641 (63.9%) White, 2,582 (7.3%) African American, 314 (0.9%) Native American, 2,236 (6.3%) Asian, 142 (0.4%) Pacific Islander, 4,998 (14.1%) from other races, and 2,519 (7.1%) from two or more races. There were 12,364 people (34.9%) of Hispanic or Latino ancestry, of any race.
The Census reported that 35,329 people (99.7% of the population) lived in households, 75 (0.2%) lived in non-institutionalized group quarters, and 28 (0.1%) were institutionalized.
There were 10,727 households, out of which 5,479 (51.1%) had children under the age of 18 living in them, 6,531 (60.9%) were opposite-sex married couples living together, 1,412 (13.2%) had a female householder with no husband present, 708 (6.6%) had a male householder with no wife present. There were 747 (7.0%) unmarried opposite-sex partnerships, and 93 (0.9%) same-sex married couples or partnerships. 1,522 households (14.2%) were made up of individuals, and 515 (4.8%) had someone living alone who was 65 years of age or older. The average household size was 3.29. There were 8,651 families (80.6% of all households); the average family size was 3.62.
The population was spread out, with 10,808 people (30.5%) under the age of 18, 3,531 people (10.0%) aged 18 to 24, 10,149 people (28.6%) aged 25 to 44, 8,553 people (24.1%) aged 45 to 64, and 2,391 people (6.7%) who were 65 years of age or older. The median age was 32.0 years. For every 100 females, there were 98.8 males. For every 100 females age 18 and over, there were 96.9 males.
There were 11,484 housing units at an average density of 710.8 per square mile (274.5/km2), of which 10,727 were occupied, of which 8,163 (76.1%) were owner-occupied, and 2,564 (23.9%) were occupied by renters. The homeowner vacancy rate was 3.4%; the rental vacancy rate was 5.5%. 26,778 people (75.6% of the population) lived in owner-occupied housing units and 8,551 people (24.1%) lived in rental housing units.
As of the census of 2000, there were 25,619 people, 7,832 households, and 6,461 families residing in the city. The population density was 796.4/km2 (2,063.2/mi2). There were 7,946 housing units at an average density of 247.0/km2 (639.9/mi2). The racial makeup of the city was 75.50% White, 3.42% Black or African American, 0.89% Native American, 2.86% Asian, 0.29% Pacific Islander, 10.58% from other races, and 6.46% from two or more races. 24.98% of the population were Hispanic or Latino of any race.
There were 7,832 households, out of which 52.0% had children under the age of 18 living with them, 68.2% were married couples living together, 9.1% had a female householder with no husband present, and 17.5% were non-families. 13.0% of all households were made up of individuals, and 4.1% had someone living alone who was 65 years of age or older. The average household size was 3.26 and the average family size was 3.56.
In the city, the population was spread out, with 34.5% under the age of 18, 7.6% from 18 to 24, 34.5% from 25 to 44, 18.0% from 45 to 64, and 5.4% who were 65 years of age or older. The median age was 32 years. For every 100 females, there were 102.1 males. For every 100 females age 18 and over, there were 100.4 males.
The median income for a household in the city was $65,589, and the median income for a family was $68,888. Males had a median income of $49,883 versus $34,659 for females. The per capita income for the city was $21,895. 5.0% of the population and 2.8% of families were below the poverty line. Out of the total population, 4.7% of those under the age of 18 and 7.4% of those 65 and older were living below the poverty line.