Excavating Contractor

Looking for a Grading Contractor in Diamond Springs, CA?

Biondi Paving & Engineering is a Fully Licensed and Insured, Family Owned Paving Company serving the Sacramento area.

Paving projects require an experienced, professional team that knows what they are doing. Don’t leave your driveway or parking lot in the hands of a new company who may have never done a project like it before. Call someone who has “been there, done that” and can approach your project with excellence.

With over 70 years of experience helping customers in our area, we’re confident we can handle any paving project you have in mind - all while providing great customer service at rock-solid pricing you can count on.

About Biondi

Based in Sacramento, our mission is to safely provide high quality general engineering services on time, delivering the best value to you. A family tradition of serving with instilled core values since 1948, we are motivated to share our knowledge gained over the decades. We aim to give you, our customer, an exceptional experience and outstanding results!Based in Sacramento, our mission is to safely provide high quality general engineering services on time, delivering the best value to you. A family tradition of serving with instilled core values since 1948, we are motivated to share our knowledge gained over the decades. We aim to give you, our customer, an exceptional experience and outstanding results!

Amedeo Biondi 1948-1954

About Biondi 1

Gene Biondi 1955-1985

About Biondi 2

Steve Biondi 1986-Present

About Biondi 3

Insurance:

Broker Of Record:
Interwest Insurance Services
PO Box 255188
Sacramento Ca 95865-5188
(916) 488-3100

Workers Compensation:
Artisans Insurance LTD
A Member-Owned Group Captive Program
Specific Excess Reinsurance coverage by Zurich North America
Mike McStocker, CPCU – mmcstocker@iwins.com

Commercial General Liability & Auto Insurance:
ASDA West
Asphalt Surface Development Association
Regional Purchasing Group
$2Million Commercial Liability Limits / $5Million Excess Liability Umbrella
Greg Scoville – gscoville@iwins.com

Bonding:
Great American Insurance Company
A.M. Best# 002213
Rating A
Financial Size Category: XIII ( 1.25B- 1.5B)
Renee Ramsey, Administrator – rramsey@iwins.com

Financial:

D-U-N-S # 041649369
Business Lending
Confirmation Letter

Bonding Reference Letter:

What Our Customers Say...

NaSyR

stars

"Got to say the work they do is so much better than I've seen other companies do and I have seen pictures from other companies compared to biondi."

Jorge Dominguez

stars

"Great friendly work place"

Chuck Horton

stars

"Biondi Paving & Engineering did our site work, they did an excellent job. On time, on budget and high quality!"

Erin Gallagher

stars

About Grading Contractor

Grading contractors are specialized professionals who work with pieces of heavy industrial equipment called graders. These machines are utilized in smoothing and flattening surfaces of concrete or other building bases or surfaces. They are also skilled at working under different weather conditions around the world. These professionals have to be specially trained in order for them to perform the tasks that they do so well. Here is a small overview of the qualifications that these contractors must have before being allowed on to work.

A person who wants to become a grading contractor needs to have a diploma or an equivalent certificate from an appropriate institution that teaches courses in this field. Usually the programs take about one year to complete. The program may also be part of a trainee internship in a construction company, where you gain real-life experience on excavation and grading related activities.

After completing the program, the grader should be able to demonstrate that he/she has the necessary knowledge and training for handling excavation and grading equipment in the construction industry. It is important that a person who wishes to become a grading contractor has sufficient knowledge in all aspects of the field, including earth sciences and mechanical skills. An excavating contractor must be skilled in mechanical drafting and computer-aided design (CAD).

As a rule, grading contractors start out by working as contractors on residential and commercial projects. Gradually, their skills will grow and they will be able to take on more varied assignments. This means that the time between projects will shorten, and the grader will have to get even more skills and expertise. After all, it takes many years to become an expert in any field, and it takes even more time and effort to master the skills and acquire experience in one particular field before branching out into another.

Some of the tasks that grading contractors will perform include excavation, site preparation, leveling and leveling, trenching, and paving. The typical day at a job site will include these tasks. They may also be involved in clearing away excess dirt, grading roads, performing some form of excavation work, grading the soil, installing heavy equipment, and using some form of electronic grading equipment. In today's society, heavy equipment is quite common, especially in urban areas where most construction projects are carried out.

A typical excavation job usually takes two to three days, but depending on the size and complexity of the job will vary. Contractors may choose to use a compact excavator for this kind of job, which is basically a piece of equipment which is able to travel through small earth circles and compact the soil to a level of one inch. All of this can be done at a rate of approximately fifteen to twenty feet per day. A grading contractor is an excellent choice for getting soil samples and for grading roads and underground pipes. When you choose to hire a professional grading contractor, you will be pleased with their high quality of workmanship and the assurance that they are well-equipped to handle whatever comes their way.

 

About Diamond Springs

This town, settled in 1848, derived its name from its crystal clear springs. Among the most gold-rich locations in the region, the area produced a 25-pound nugget, one of the largest ever found in El Dorado County. Its most thriving period was in 1851 and, through its lumber, lime production, and agriculture, Diamond Springs has retained some of its early importance.

A post office was established at Diamond Spring in 1853; the name was changed to Diamond Springs in 1950.

The 2010 United States Census reported that Diamond Springs had a population of 11,037. The population density was 660.4 inhabitants per square mile (255.0/km2). The racial makeup of Diamond Springs was 9,743 (88.3%) White, 39 (0.4%) African American, 176 (1.6%) Native American, 110 (1.0%) Asian, 6 (0.1%) Pacific Islander, 518 (4.7%) from other races, and 445 (4.0%) from two or more races. Hispanic or Latino of any race were 1,377 persons (12.5%).

The Census reported that 10,904 people (98.8% of the population) lived in households, 23 (0.2%) lived in non-institutionalized group quarters, and 110 (1.0%) were institutionalized.

There were 4,579 households, out of which 1,195 (26.1%) had children under the age of 18 living in them, 2,208 (48.2%) were opposite-sex married couples living together, 530 (11.6%) had a female householder with no husband present, 199 (4.3%) had a male householder with no wife present. There were 230 (5.0%) unmarried opposite-sex partnerships, and 29 (0.6%) same-sex married couples or partnerships. 1,380 households (30.1%) were made up of individuals, and 848 (18.5%) had someone living alone who was 65 years of age or older. The average household size was 2.38. There were 2,937 families (64.1% of all households); the average family size was 2.94.

The population was spread out, with 2,253 people (20.4%) under the age of 18, 776 people (7.0%) aged 18 to 24, 2,200 people (19.9%) aged 25 to 44, 3,373 people (30.6%) aged 45 to 64, and 2,435 people (22.1%) who were 65 years of age or older. The median age was 47.1 years. For every 100 females, there were 88.9 males. For every 100 females age 18 and over, there were 84.3 males.

There were 4,921 housing units at an average density of 294.5 per square mile (113.7/km), of which 4,579 were occupied, of which 3,301 (72.1%) were owner-occupied, and 1,278 (27.9%) were occupied by renters. The homeowner vacancy rate was 3.4%; the rental vacancy rate was 5.0%. 7,849 people (71.1% of the population) lived in owner-occupied housing units and 3,055 people (27.7%) lived in rental housing units.

Scroll to Top